Magifaom applied to vehicle
1 3

Autobrite Direct

Magifoam - Ultimate Prewash Snowfoam

£9.99
In stock
Autobrite Direct and Magifoam are synonymous with each other and have been since 2005! As one of our flagship products, it remains one of our best sellers today, and not without good reason. This snow foam wash creates a stable and thick lasting foam that won’t damage a wax or sealant coating but lifts away dirt and grime in a matter of minutes.
Size: 500 ml
FEATURES
  • Powerful active cleaning agents
  • Stable dense foam – dwell time of up to 30 mins
  • Wax and sealant safe, Ideal for all year round cleaning
  • Very economical
  • Cherry scented
FULL DESCRIPTION

Magifoam contains a special blend of active cleaners, biodegradable surfactants and foaming agents, when used as directed. Magifoam snow foam is LSP safe and won’t harm your existing wax or sealant protection. Magifoam creates a stable and long-dwelling active foam to break down surface dirt and loosen it before contact washing. Snow foam is an essential step in the detailing process. Removing the majority of dirt before the contact wash stage, this reduces the chance of inflicting fine swirl mark and will reduce marring.

How to use:
Place up to 2” of Magifoam into the Autobrite Snow Foam Lance and fill up with cold water. Shake you Magifoam mix. Pre-rinse your car and remove any loose dirt. Apply Magifoam at the desired thickness by adjusting the dial on the top of the foam lance. Completely cover the car in foam, start from the top of the car and adjusting the foam lance to give the desired angle of foam. Allow to dwell for up to 5 minutes then rinse the car thoroughly with clean water. Do not apply to hot surfaces or allow to dry. Avoid application to the ceramic discs.
STEP BY STEP GUIDE
  1. Pour 100 - 200 ml of Magifoam into a Snow Foam Lance Add water to the desired level
  2. Shake the mixture well.
  3. Pre-rinse your car to remove loose dirt and debris.
  4. Adjust the dial on the lance to the desired thickness.
  5. Start at the top of the car, working your way down
  6. Apply an even coating of Magifoam to all surfaces
  7. Allow the Magifoam to dwell for approx 5- 10mins
  8. Rinse thoroughly
FREQUENTLY ASKED QUESTIONS
What is Magifoam used for?

Magifoam is a pre-wash snow foam designed to loosen and lift dirt, road grime and contamination before contact washing. This helps reduce the amount of dirt you need to physically remove with your wash mitt, lowering the risk of swirl marks and scratches.
Will Magifoam remove wax or sealant protection?

No. Magifoam is designed to provide effective cleaning without degrading existing wax or sealant protection, making it suitable for regular maintenance washes.
How long should I leave Magifoam to dwell?

Allow Magifoam to dwell on the vehicle for several minutes while it loosens dirt and grime. Do not allow the product to dry on the surface, particularly when washing in warm or direct sunlight.
Do I need to wash the car after using Magifoam?

Yes. Magifoam is designed as a pre-wash rather than a replacement for your contact wash. After allowing it to dwell, rinse the vehicle thoroughly before continuing with your normal shampoo and wash routine.
Do I need a pressure washer to use Magifoam?

For the thickest and most even foam, we recommend applying Magifoam using a snow foam lance connected to a pressure washer. This helps achieve good coverage across the entire vehicle.
Can I use Magifoam for every maintenance wash?

Yes. Magifoam is ideal for regular maintenance washes. Its effective but protection-safe formula helps remove loose contamination before contact washing without compromising your existing wax or sealant.
 PDF Icon Download SDS Sheet
Size: 500 ml